Effects of tributyl-tin on a marine microalga, Tetraselimis suecica

Marine pollutants induce changes in microalgal metabolism. In this study effects of tributyl-tin chloride (TBTCl) on a marine microalga Tetraselmis suecica was studied. The changes induced by TBTCI on growth rate, viability and biochemicals were assessed. In acute exposure to TBTCl, EC50 estimated for 24 hr was 2.02 microg ml(-1), whereas total lethality was observed at 4 microg ml(-1). In chronic exposure to TBTCl, at higher concentrations (0.5-1 microg ml(-1)) growth rate, chlorophyll pigments, carbohydrate and protein contents were reduced. The results of this study indicate that TBTCl toxicity made drastic changes in growth and biochemical composition of T. suecica.     

Biophoton emission of MDCK cell with hydrogen peroxide and 60 Hz AC magnetic field

We studied biophoton characteristics of Madin-Darby canine kidney (MDCK) cells under the influence of H2O2 by employing a photomultiplier tube (PMT) and a fluorescence microscope. H2O2 was used for producing reactive oxygen species (ROS) in the measurement. Images from a fluorescence microscope show an increase of photon intensity emitted from the sample due to H2O2. By using a PMT we measured quantitative change in biophoton emission with application of H2O2 to the MDCK cell culture, found that the increase of the biophoton is dependent upon the amount of H2O2. The agreement between the results of the PMT and the fluorescence microscope suggests the possibility of quantitative measurement of the influence of ROS on living tissue or cell. In addition we applied a 60 HzAC magnetic field on the cells to investigate the change in reaction between MDCK cell and ROS. It showed that a decay of chemiluminescence intensity has taken a different path following exposure to the magnetic field. As a result, the PMT measurement might be considered as a useful tool for studying biochemical characteristics in relation to ROS.     

The Mini-Cup Jelly Court Cases: A Comparative Analysis from a Food Ethics Perspective

This study compares and analyzes separate court rulings in three countries on “mini-cup jelly” (a firm jelly containing konjac and packaged in bite-sized plastic cups) from a food ethics perspective. While the Korean and US courts decided that the mini-cup jelly was defective, and that the manufacturers or importers were liable for damages in these cases, the Japanese court took an opposing stance in favor of the manufacturer. However, from an absolute and fundamental viewpoint, the jelly was unacceptable, ethically as well as legally, because it was unsafe, unwholesome, and unfit for children’s consumption. I argue that the ignoring or sidelining of fundamental principles of food ethics, especially “respect for life,” was at the core of these cases. If the manufacturers and importers had considered and prioritized the principles of food ethics over and above big sales and profits, the choking accidents could have been prevented. To conclude, it is very important to minimize risks by applying the principles of food ethics at the outset before any accidents can occur.     

Rapid in situ assessment for predicting soil quality using an algae-soaked disc seeding assay

The soil quality of remediated land is altered and this land consequently exerts unexpected biological effects on terrestrial organisms. Therefore, field evaluation of such land should be conducted using biological indicators. Algae are a promising new biological indicator since they are a food source for organisms in higher soil trophic levels and easily sampled from the soil. Field evaluation of soil characteristics is preferred to be testing in laboratory conditions because many biological effects cannot be duplicated during laboratory evaluations. Herein, we describe a convenient and rapid algae-soaked disc seeding assay for assessing soil quality in the field based on soil algae. The collection of algae is easy and rapid and the method predicts the short-term quality of contaminated, remediated, and amended farm and paddy soils. The algae-soaked disc seeding assay is yet to be extensively evaluated, and the method cannot be applied to loamy sand soil in in situ evaluations. The algae-soaked disc seeding assay is recommended for prediction of soil quality in in situ evaluations because it reflects all variations in the environment. The algae-soaked disc seeding assay will help to develop management strategies for in situ evaluation.     

Indoor air quality assessment in child care and medical facilities in Korea

In order to characterize the status of indoor air pollution in some important facilities, a list of key criteria pollutants [particulate matter (PM(10)), carbon dioxide (CO(2)), carbon monoxide (CO), formaldehyde (HCHO), and bioaerosol] was measured from a total of 91 randomly selected sites in 18 different cities, Korea (February 2006 to December 2009). The target facilities include 43 child care facilities, 38 medical facilities, 6 elementary schools, and 4 postnatal care centers. The results showed that some air pollutants (e.g., CO and HCHO) did not exceed the recommended guideline [e.g., the Korean indoor air standard (KIAS) values of 10 ppm and 100 ppb, respectively]. However, concentration of PM(10), CO(2), and bioaerosol occasionally exceeded their respective guidelines (e.g., seven, three, and two cases). Discrete seasonalities were observed from indoor pollutants because of varying ventilation practice (e.g., summer time dominance of PM(10), HCHO, and bioaerosol or winter dominance of CO(2) and CO). However, as the concentrations of the indoor pollutants were scarcely above the recommended guideline level, more diversified approaches are desirable to diagnose the status of indoor pollution and to provide a realistic strategy for the improvement of IAQ.     

Comparative study of torrefaction of empty fruit bunches and palm kernel shell

Journal of Material Cycles and Waste Management - This paper describes the effect of torrefaction on the characteristics of empty fruit bunches (EFB) and palm kernel shell (PKS). The torrefaction...     

An assessment of global warming and biodiversity: CGE EMEDA analyses

Environmental Economics and Policy Studies - Genetic resources have been widely used for agricultural animal breeding, drug development, and biomaterials. Coherent assessments of global warming on...     

Effects on nano zero-valent iron reactivity of interactions between hardness, alkalinity, and natural organic matter in reverse osmosis concentrate

Nanoscale zero-valent iron （NZVI） is considered to have potential to reduce nitrate in the concentrate generated by high pressure membrane processes aimed at water reuse. However, it is necessary to verify the effect of the matrix components in the concentrates on NZVI reactivity. In this study, the influence of hardness, alkalinity, and organic matter on NZVI reactivity was evaluated by the response surface method （RSM）. Hardness （Ca/＋） had a positive effect on NZVI reactivity by accelerating iron corrosion. In contrast, alkalinity （bicarbonate; HCO3） and organic matter （humic acid; HA） had negative effects on NZVI reactivity due to morphological change to carbonate green rust, and to competitive adsorption of HA, respectively. The validity of the statistical prediction model derived from RSM was confirmed by an additional confirmation experiment, and the experimental result was within the 95% confidential interval. Therefore, it can be indicated that the RSM model produced results that were statistically significant.     

Ball end milling mechanistic model based on a voxel-based geometric representation and a ray casting technique

Prediction of machining forces involved in complex geometry can be valuable information for machine shops. This paper presents a mechanistic cutting force simulation model for ball end milling processes, using ray casting and voxel representation methods used in 3D computer graphics field. Using this method, instantaneous uncut chip cross sectional areas can be extracted, which can be used in cutting pressure coefficient extraction and machining simulation including machining forces and geometry of the workpiece. The major advantage of the proposed scheme is that it can simulate milling processes with arbitrary cutting tool geometry on a workpiece with complex geometry, using an algorithm with constant time complexity. A series of cutting experiments were carried out to validate the model.     

Synergistic Effects of Combined Chlorine and Vitamin B1 on the Reduction of Murine Norovirus-1 on the Oyster (Crassostrea gigas) Surface

This study investigated the synergistic effects of combined chlorine (200, 500, 700, and 1000 ppm) and vitamin B₁ (1000, 2000, and 3000 ppm) on the murine norovirus-1 (MNV-1), a human norovirus (NoV) surrogate, on oyster surface. Vitamin B₁ slightly reduced MNV-1 (0.04–0.3 log-reduction), whereas chlorine significantly reduced MNV-1 (0.4–1.0 log-reduction). The combined chlorine and vitamin B₁ resulted in a 0.52–1.97 log-reduction of MNV-1. The synergistic reduction in the MNV titer was not dependent on the concentrations of chlorine and vitamin B₁, and it ranged between 0.08 and 1.03 log₁₀ PFU/mL. The largest synergistic reduction observed was for the combined 700 ppm chlorine and 1000 ppm vitamin B₁. The pH and mechanical texture of the oysters were not significantly changed by the combined 0–1000 ppm chlorine and 3000 ppm vitamin B₁. The overall sensory acceptability were significantly (P < 0.05) reduced in oysters treated with 1000 ppm chlorine and 3000 ppm vitamin B₁ than in those treated with 0–700 ppm chlorine and 3000 ppm vitamin B₁. This study suggests that the combined 700 ppm chlorine and 3000 ppm vitamin B₁ could potentially be used to reduce NoV on oyster surface without causing concomitant changes in the mechanical texture, pH, or sensory qualities of the oysters.